AURORA Electron Devices® — Technical Lexicon
Entry 5.2
Interchannel CoherenceCoerenza Intercanale
Technical Lexicon of Pattern Conservation in Stereophonic Electroacoustic Reproduction
Lexicon tecnico della Conservazione del Pattern nella Riproduzione Elettroacustica Stereofonica
0. NARRATIVE FORMULATION
“The channels must retain the encoded differences without adding dominant asymmetries of their own.”
1. DEFINITION
Interchannel coherence is the stability of amplitude, phase, time, spectral, dynamic and noise relations between the channels of stereophonic reproduction.
2. POSITION WITHIN THE THEORY*
Stereophony encodes part of the spatial information through differences and correlations between channels. Fidelity does not require the channels to be identical at the output, but requires differences introduced by the chain not to alter, beyond tolerance, those encoded in the correctly executed stereophonic recording adopted as the reference. Intrinsic crosstalk between paths must be distinguished from the natural acoustic cross-contributions by which each loudspeaker reaches both aural reference points: the latter belong to the stereophonic transformation and to the boundary conditions, and do not automatically constitute degradation.
3. RELATIONSHIPS AND OPERATING CONDITIONS
4. PERCEPTUAL TRANSLATION
Loss of interchannel coherence may displace or broaden sources, reduce focus, make a trajectory unstable or alter the width of the scene. The effect depends on the nature of the asymmetry and on the content.
5. MEASUREMENT, EVIDENCE AND LIMITS
Measurements must compare channels under the same conditions and include level, phase, timing, distortion and load response. Known spatial patterns and blind tests may verify sensitivity to specific asymmetries.
6. TRANSLATION WITHIN THE AURORA Electron Devices® TECHNICAL-SCIENTIFIC FRAMEWORK
'AURORA' regards circuit symmetry, selection, layout, power supply, wiring, transducers and installation as parts of interchannel coherence. In complete systems, geometrical setup is treated with the same care as electrical and dynamic control objectives.
7. OPERATIONAL SUMMARY
Interchannel coherence = preservation of stereophonic relations through two paths that must remain under reciprocal control.
Claudio Angelo Chiappini, Theory of Pattern Conservation in Stereophonic Electroacoustic Reproduction — Technical Edition, Version 1.0. ORCID 0009-0007-0742-5780. DOI: 10.5281/zenodo.20768488
Zenodo is an external website and applies its own privacy and cookie policies.
0. ESPRESSIONE NARRATIVA
“I canali devono mantenere le differenze codificate senza aggiungere asimmetrie proprie dominanti.”
1. DEFINIZIONE
La coerenza intercanale è la stabilità delle relazioni di ampiezza, fase, tempo, spettro, dinamica e rumore tra i canali della riproduzione stereofonica.
2. INQUADRAMENTO NELLA TEORIA*
La stereofonia codifica parte dell’informazione spaziale mediante differenze e correlazioni fra canali. La fedeltà non richiede canali identici in uscita, ma che le differenze introdotte dalla catena non alterino oltre tolleranza quelle codificate nella registrazione stereofonica correttamente eseguita e assunta come riferimento. La diafonia intrinseca fra i percorsi deve essere distinta dai contributi acustici incrociati naturali con cui ciascun diffusore raggiunge entrambi i riferimenti auricolari: questi ultimi appartengono alla trasformazione stereofonica e alle condizioni al contorno, e non costituiscono automaticamente degradazione.
3. RELAZIONI E CONDIZIONI OPERATIVE
4. TRADUZIONE PERCETTIVA
La perdita di coerenza intercanale può spostare o allargare le sorgenti, ridurre la focalizzazione, rendere instabile la traiettoria o modificare l’ampiezza della scena. L’effetto dipende dalla natura dell’asimmetria e dal contenuto.
5. MISURA, EVIDENZA E LIMITI
Le misure devono confrontare canali sotto le stesse condizioni e includere livello, fase, timing, distorsione e risposta al carico. Pattern spaziali noti e prove cieche possono verificare la sensibilità a specifiche asimmetrie.
6. TRADUZIONE NEL FRAMEWORK TECNICO-SCIENTIFICO AURORA Electron Devices®
Nel framework 'AURORA', simmetria circuitale, selezione, layout, alimentazione, cablaggio, trasduttori e installazione sono considerati come parti della coerenza intercanale. Nei sistemi completi, il setup geometrico è trattato con la stessa attenzione degli obiettivi di controllo elettrici e dinamici.
7. SINTESI OPERATIVA
Coerenza intercanale = preservazione delle relazioni stereofoniche attraverso due percorsi che devono restare reciprocamente controllati.
Claudio Angelo Chiappini, Teoria della Conservazione del Pattern nella Riproduzione Elettroacustica Stereofonica — Edizione Tecnica, Versione 1.0. ORCID 0009-0007-0742-5780. DOI: 10.5281/zenodo.20778565
Zenodo è un sito esterno e applica proprie politiche in materia di privacy e cookie.